WorldRobotHub
For a workcell with a fixed base and fixtures, screen the arm using the original manual for the configuration on the quote. The CB5 manuals list 7.5 kg maximum payload and 850 mm reach for UR7e, and 12.5 kg and 1,300 mm for UR12e. The base footprints are 151 mm and 190 mm in diameter respectively. Check the mounting drawing as well as the space for the fixture, cables and controller.
Resolve the UR7e reach figure
The 920 mm in the newer UR7e-920 name comes from a revised reach measurement. Universal Robots describes the arm mechanics as unchanged by this naming change. For a new cell or retrofit, ask which control box, teach pendant and software are being supplied, and use the geometry and supported tools for that combination.
Validate the working poses
- Add the part, gripper, adapter and any carried equipment to the payload assessment. Use the combined load centre with the manufacturer’s payload guidance.
- In the cell model, verify pickup, set-down and approach poses at the actual tool centre point. Include access to the fixture during service and room for cable movement.
- Run a representative cycle with the quoted equipment. Both manuals specify possible performance reduction above 35 °C ambient temperature. Include the expected ambient conditions, workpiece and dwell times in the acceptance trial.

