Skip to content
Request a quote

Planning a sweeper shift with Beetle, MT1 or MT1 Max

Compare the published battery, runtime and cleaning modes for three dry sweepers, and design a site trial around your actual route.

WorldRobotHub

Start with a complete cleaning route, the time available between shifts and the time needed to empty the bin. Those inputs tell you whether a sweeper can finish the work using the available charging and service points.

Match the battery and mode to the quote

Gausium’s Beetle specification gives 3 h for Standard with 40 Ah and 5 h for Pro with 60 Ah. Its overview quotes 4–8 h alongside a 60 Ah battery. Ask for the expected runtime with the quoted battery, brush settings and route. Beetle occupies 990 × 750 mm with side brushes fitted, and the technical sheet lists 1,200 mm of space for a U-turn.

PUDU lists 4–8 h for MT1 across cleaning levels and 5–10 h for MT1 Max, with 8 h in standard mode on MT1 Max. PUDU publishes a maximum of 1,800 m²/h in MT1’s standard cleaning mode and 2,200 m²/h for coverage cleaning with MT1 Max. Its spot-cleaning figures describe a different task. Both have a published 35 L waste capacity, so measure how often the bin fills with the debris your site actually produces.

Run the same route with each candidate

  1. Mark turnarounds, pallet obstructions, doorways and the planned dock on the route drawing. Include the working width with brushes fitted.
  2. Run representative debris from the start to the end of the planned route. Record area accepted after the pass, manual touch-ups, remaining battery and time spent travelling, waiting, emptying the bin and charging.
  3. Compare accepted area per elapsed hour and minutes of manual intervention. Use the same cleaning acceptance criteria, traffic window and comparable floor condition for each candidate.

Gausium’s MAKELIS case describes two mapped cleaning passes after production stops. Use that deployment as an example of scheduling around floor traffic. Set the number of passes and the service stops from your own trial.

Matching models

Models to explore

Gausium

Beetle

SweepingListed
Sweeping width
750 mm
Debris container
45 L
Body width
750 mm
Checked

PUDU Robotics

PUDU MT1

SweepingListed
Debris container
35 L
Sweeping runtime
4–8 h
Body width
600 mm
Checked

PUDU Robotics

PUDU MT1 Max

Sweeping
Body height
675 mm
Body width
600 mm
Body length
840 mm
Checked

Insights

More insights

All insights

Analysis

Sizing a CB5 workcell for UR7e or UR12e

Use the original Universal Robots manuals to reconcile reach figures, check mounting and simulate the working envelope before quoting an arm.