Skip to content
Request a quote

Measure the route before shortlisting a floor-cleaning robot

A site survey for comparing scrub widths, door clearances and water stops before a supplier demonstration.

WorldRobotHub

Autonomous floor scrubber with a visible brush and squeegee

Start with one complete cleaning circuit. Include access to the water point, the recovery drain, the charger and every door the machine will cross. Mark where people queue, where furniture can move and where the floor changes texture.

Measure three clearances

Record the narrowest straight passage, the narrowest turn and the room available at the end of each run. The Mira and Marvel manufacturer sheets distinguish machine width from minimum passage width. The Mira lists a 550 mm body and a 660 mm minimum passage. The Marvel lists a 699 mm body and an 850 mm minimum passage. Use the supplier’s operating clearance as the starting point for the site trial.

Match the cleaning head to the task

Compare like modes. Scrubbing a hard floor, sweeping debris and dust mopping are separate jobs with separate widths and run times. For the Omnie, record the brush configuration on the quotation because the disc and roller change both the cleaning width and the machine weight.

Time the whole circuit

Ask the supplier to run the route twice. Record active cleaning time, water and recovery stops, and any staff intervention. Calculate usable area from the portion the machine actually completes. Add manual touch-up and charging to the shift plan.

Matching models

Models to explore

Gausium

Mira

Multifunction cleaningListed
Minimum passage
660 mm
Min. U-turn width
950 mm
Scrubbing width
400 mm
Checked

Gausium

Marvel

Multifunction cleaningListed
Minimum passage
850 mm
Min. U-turn width
1300 mm
Scrubbing width
600 mm
Checked

Gausium

Omnie

Multifunction cleaningListed
Minimum passage
800 mm
Min. U-turn width
1100 mm
Scrubbing width
520 mm
Checked

Insights

More insights

All insights

Analysis

Sizing a CB5 workcell for UR7e or UR12e

Use the original Universal Robots manuals to reconcile reach figures, check mounting and simulate the working envelope before quoting an arm.